91勛圖

91勛圖

Filter courses by:

Results:

Start Date: 07-21-2026
End Date: 07-21-2026

Schedule: Weekly - Tue, 6:00 PM - 8:00 PM

Location: Online

This presentation will provide the dental professional with the latest information on dental imaging, including common safety techniques for both you and your patient. A comparison of types of imaging useful in your practice will be presented, and case studies will be utilized to assist with understanding dental imaging. This program is designed for dental assistants with an added qualification in dental radiography. Objectives:1. Identify key individuals in the development of dental imaging; 2. Identify radiation safety techniques in exposing dental imaging; 3. Compare analog and digital imaging; and 4. Identify dental anomalies by case studies.... view moreless

Tuition: 59.00

CHDE-4010 159761

Start Date: 07-27-2026
End Date: 09-04-2026

Schedule: Schedule Varies

Location: Other/Out of District

Looking to start a career in one of the fastest growing occupations? 91勛圖’sClass A Commercial Driver’s License (CDL)training program is designed for adults who would like to train for a high-demand career in a short-term time frame. Tuition includes online entry-level driver theory training, entry-level driver behind the wheel training, along with testing with a third party Iowa DOT certified examiner. All behind the wheel training and testing will occur at Hawkeye Community College’s Regional Transportation Center (6433 Hammond Ave, Waterloo IA). This class will focus on developing safe driving skills including backing, turning, and driving on rural and suburban roads. You will receive hands-on training using full-size semi-tractor/trailers and virtual driving simulators with 10 speed and automatic options available. Daily training will occur with scheduling available to meet your needs. Available training times include 8AM-12PM, 1PM – 5PM, or 5PM-9PM. You will have up to 6 weeks to become proficient in every skill before testing. Once confident with your skills, the following DOT tests will take place: DOT vehicle Inspection, skills, driving. Graduates can find employment in a variety of areas including, but not limited to, a truck driver, spotter, shag driver, and many more. Tuition assistance may fund up to 100 percent of your registration cost for this program. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form at www.kirkwood.edu/cefunding. Registration deadline is 11:59 PM on the Sunday prior to the class start date.... view moreless

Tuition: 4995.00

CTTK-1103 162101

Start Date: 07-27-2026
End Date: 08-28-2026

Schedule: Schedule Varies

Location: Cedar Rapids - Main Campus

Launch your commercial driving career in less than a month with 91勛圖’s ELDT Class B to A CDL Fusion Program. Commercial driving continues to be an in-demand field with excellent local employment opportunities. In this program, you’ll learn the safe, professional driving skills required to earn your Class A CDL and begin a well-paying career. This comprehensive program includes 90 hours of in-person and Behind-the-Wheel (BTW) training, beginning with 50 hours of Class B skills and pre-trip instruction, followed by 40 hours of Class A training. Operating a semi requires specialized skills, including safe maneuvering and backing techniques. You will learn how to handle real-world backing scenarios such as straight-line, offset, parallel, blindside, and angle backing. Additional training includes navigating obstacles like vehicles, posts, curved entrances, docks, and building areas. Training is available using both manual and automatic transmission vehicles. 91勛圖 is an approved Federal Motor Carrier Safety Administration (FMCSA) Training Provider. Course tuition includes 8 hours of online entry-level driver theory training and 90 hours of behind-the-wheel training completed over a three-week period. After holding a Commercial Learner’s Permit (CLP) for at least 14 days and completing both the Entry-Level Driver Training (ELDT) and the behind-the-wheel driving requirements, students must pass the CDL skills and driving test. To schedule the test, students must submit the CDL Drive Test Request form available on the Iowa Department of Transportation website: Schedule a CDL Drive Test – Iowa DOT. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form atwww.kirkwood.edu/cefunding.... view moreless

Tuition: 4900.00

CTTK-1210 156560

Start Date: 07-29-2026
End Date: 07-29-2026

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Cedar Rapids - Main Campus

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162040

Start Date: 08-10-2026
End Date: 08-13-2026

Schedule: Weekly - Mon, Tue, Wed, Thu, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for individuals interested in teaching the 10-and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Minimum student contact hours: 26 Prerequisites: Students must successfully complete the OSHA 511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA 503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.... view moreless

Tuition: 835.00

ETOS-3001 156492 General Industry Safety

Start Date: 08-17-2026
End Date: 10-02-2026

Schedule: Schedule Varies

Location: Other/Out of District

Looking to start a career in one of the fastest growing occupations? 91勛圖’sClass A Commercial Driver’s License (CDL)training program is designed for adults who would like to train for a high-demand career in a short-term time frame. Tuition includes online entry-level driver theory training, entry-level driver behind the wheel training, along with testing with a third party Iowa DOT certified examiner. All behind the wheel training and testing will occur at Hawkeye Community College’s Regional Transportation Center (6433 Hammond Ave, Waterloo IA). This class will focus on developing safe driving skills including backing, turning, and driving on rural and suburban roads. You will receive hands-on training using full-size semi-tractor/trailers and virtual driving simulators with 10 speed and automatic options available. Daily training will occur with scheduling available to meet your needs. Available training times include 8AM-12PM, 1PM – 5PM, or 5PM-9PM. You will have up to 6 weeks to become proficient in every skill before testing. Once confident with your skills, the following DOT tests will take place: DOT vehicle Inspection, skills, driving. Graduates can find employment in a variety of areas including, but not limited to, a truck driver, spotter, shag driver, and many more. Tuition assistance may fund up to 100 percent of your registration cost for this program. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form at www.kirkwood.edu/cefunding. Registration deadline is 11:59 PM on the Sunday prior to the class start date.... view moreless

Tuition: 4995.00

CTTK-1103 162103

Start Date: 08-24-2026
End Date: 08-27-2026

Schedule: Weekly - Mon, Tue, Wed, Thu, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Minimum student contact hours: 26 Prerequisites: Students must successfully complete the OSHA 510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA 502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.... view moreless

Tuition: 835.00

ETOS-3000 156491 Contruction Safety

Start Date: 09-07-2026
End Date: 10-09-2026

Schedule: Schedule Varies

Location: Online

Launch your commercial driving career in less than a month with 91勛圖’s ELDT Class B to A CDL Fusion Program. Commercial driving continues to be an in-demand field with excellent local employment opportunities. In this program, you’ll learn the safe, professional driving skills required to earn your Class A CDL and begin a well-paying career. This comprehensive program includes 90 hours of in-person and Behind-the-Wheel (BTW) training, beginning with 50 hours of Class B skills and pre-trip instruction, followed by 40 hours of Class A training. Operating a semi requires specialized skills, including safe maneuvering and backing techniques. You will learn how to handle real-world backing scenarios such as straight-line, offset, parallel, blindside, and angle backing. Additional training includes navigating obstacles like vehicles, posts, curved entrances, docks, and building areas. Training is available using both manual and automatic transmission vehicles. 91勛圖 is an approved Federal Motor Carrier Safety Administration (FMCSA) Training Provider. Course tuition includes 8 hours of online entry-level driver theory training and 90 hours of behind-the-wheel training completed over a three-week period. After holding a Commercial Learner’s Permit (CLP) for at least 14 days and completing both the Entry-Level Driver Training (ELDT) and the behind-the-wheel driving requirements, students must pass the CDL skills and driving test. To schedule the test, students must submit the CDL Drive Test Request form available on the Iowa Department of Transportation website: Schedule a CDL Drive Test – Iowa DOT. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form atwww.kirkwood.edu/cefunding.... view moreless

Tuition: 4900.00

CTTK-1210 156561

Start Date: 09-09-2026
End Date: 09-11-2026

Schedule: Weekly - Wed, Thu, Fri, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for Outreach Training Program trainers who have completed OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes. Minimum student contact hours: 18 Prerequisites: OSHA 500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA 500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.... view moreless

Tuition: 720.00

ETOS-3002 156495 Construction Safety

Start Date: 09-30-2026
End Date: 09-30-2026

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Washington County

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162043

Start Date: 10-12-2026
End Date: 11-13-2026

Schedule: Schedule Varies

Location: Online

Launch your commercial driving career in less than a month with 91勛圖’s ELDT Class B to A CDL Fusion Program. Commercial driving continues to be an in-demand field with excellent local employment opportunities. In this program, you’ll learn the safe, professional driving skills required to earn your Class A CDL and begin a well-paying career. This comprehensive program includes 90 hours of in-person and Behind-the-Wheel (BTW) training, beginning with 50 hours of Class B skills and pre-trip instruction, followed by 40 hours of Class A training. Operating a semi requires specialized skills, including safe maneuvering and backing techniques. You will learn how to handle real-world backing scenarios such as straight-line, offset, parallel, blindside, and angle backing. Additional training includes navigating obstacles like vehicles, posts, curved entrances, docks, and building areas. Training is available using both manual and automatic transmission vehicles. 91勛圖 is an approved Federal Motor Carrier Safety Administration (FMCSA) Training Provider. Course tuition includes 8 hours of online entry-level driver theory training and 90 hours of behind-the-wheel training completed over a three-week period. After holding a Commercial Learner’s Permit (CLP) for at least 14 days and completing both the Entry-Level Driver Training (ELDT) and the behind-the-wheel driving requirements, students must pass the CDL skills and driving test. To schedule the test, students must submit the CDL Drive Test Request form available on the Iowa Department of Transportation website: Schedule a CDL Drive Test – Iowa DOT. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form atwww.kirkwood.edu/cefunding.... view moreless

Tuition: 4900.00

CTTK-1210 156562

Start Date: 10-13-2026
End Date: 10-13-2026

Schedule: Weekly - Tue, 8:00 AM - 12:00 PM

Location: Cedar Rapids - Main Campus

AI tools can do much more than give quick answers - they can help you think through problems, organize information, and make better decisions. In this hands-on workshop, you will learn how to build YODA, Your Own Digital Assistant, using your documents, expertise, values, and work priorities. Instead of relying on generic AI responses, you will create a more focused assistant that helps you ask better questions, reduce errors, challenge assumptions, and evaluate ideas with more confidence. This matters because AI is becoming part of everyday work, and knowing how to use it well can save time, improve communication, and support stronger decision-making. You will practice using AI to organize knowledge, explore options, identify risks, and connect decisions to outcomes. By the end of the workshop, you will have a practical AI partner that can help make your job easier, your work more efficient, and your thinking sharper. Please bring your own laptop to this seminar. After the seminar, you will also receive the option to enroll in a complimentary Grow with Google AI certificate program after completing the course. This added-value benefit provides access to a recognized Google credential focused on practical, workplace-ready AI skills - helping you strengthen your professional toolkit and showcase your AI competency at no additional cost.... view moreless

Tuition: 399.00

CCPS-1120 162061

Start Date: 10-20-2026
End Date: 01-28-2027

Schedule: Schedule Varies

Location: Multiple, please check class description

The Sterile Processing Technician program is designed to prepare students to function as a sterile processing professional in multiple healthcare settings. Sterile Processing technicians perform and participate in decontamination, cleaning, assembling, packaging, scanning, sterilization, storage, and distribution of reusable surgical instrumentation and equipment. Working in a sterile processing area requires specific knowledge and skills, including an understanding of the following key areas and topics: Instrumentation: Knowledge of surgical instruments and specialty devices Processing of Surgical Instrumentation: Decontamination, packaging, and sterilization Processing of Moveable Patient Equipment: Processing, cleaning, testing, assembly, and distribution of equipment Storage and Inventory: Storage, handling, and distribution, as well as inventory control and cost recovery systems Medical Terminology: Knowledge of medical terminology, anatomy & physiology, and microbiology Prevention Processes: Infection prevention, decontamination, and disinfection After completing this hybrid program, learners will be prepared to take the leading national, industry-recognized certification exam(s) essential to entry-level employment in this fast-growing field, CRCST - Healthcare Sterile Processing Association (HSPA). Voucher for certification exam is included in the course fee. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form at www.kirkwood.edu/cefunding.... view moreless

Tuition: 2399.00

CHHO-5110 161387

Start Date: 10-21-2026
End Date: 10-23-2026

Schedule: Weekly - Wed, Thu, Fri, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for Outreach Training Program trainers who have completed course 501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes. Minimum student contact hours: 18 Prerequisites: OSHA 501 Trainer Course in OSHA Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach trainer card or an official transcript showing successful completion of the OSHA 501 Trainer Course in OSHA Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.... view moreless

Tuition: 720.00

ETOS-3003 156496 General Industry Training

Start Date: 11-10-2026
End Date: 11-13-2026

Schedule: Weekly - Tue, Wed, Thu, Fri, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Minimum student contact hours: 26 Prerequisites: Students must successfully complete the OSHA 510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA 502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.... view moreless

Tuition: 835.00

ETOS-3000 156490 Contruction Safety

Start Date: 11-16-2026
End Date: 12-18-2026

Schedule: Schedule Varies

Location: Online

Launch your commercial driving career in less than a month with 91勛圖’s ELDT Class B to A CDL Fusion Program. Commercial driving continues to be an in-demand field with excellent local employment opportunities. In this program, you’ll learn the safe, professional driving skills required to earn your Class A CDL and begin a well-paying career. This comprehensive program includes 90 hours of in-person and Behind-the-Wheel (BTW) training, beginning with 50 hours of Class B skills and pre-trip instruction, followed by 40 hours of Class A training. Operating a semi requires specialized skills, including safe maneuvering and backing techniques. You will learn how to handle real-world backing scenarios such as straight-line, offset, parallel, blindside, and angle backing. Additional training includes navigating obstacles like vehicles, posts, curved entrances, docks, and building areas. Training is available using both manual and automatic transmission vehicles. 91勛圖 is an approved Federal Motor Carrier Safety Administration (FMCSA) Training Provider. Course tuition includes 8 hours of online entry-level driver theory training and 90 hours of behind-the-wheel training completed over a three-week period. After holding a Commercial Learner’s Permit (CLP) for at least 14 days and completing both the Entry-Level Driver Training (ELDT) and the behind-the-wheel driving requirements, students must pass the CDL skills and driving test. To schedule the test, students must submit the CDL Drive Test Request form available on the Iowa Department of Transportation website: Schedule a CDL Drive Test – Iowa DOT. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form atwww.kirkwood.edu/cefunding.... view moreless

Tuition: 4900.00

CTTK-1210 156564

Start Date: 11-17-2026
End Date: 11-20-2026

Schedule: Weekly - Tue, Wed, Thu, Fri, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for individuals interested in teaching the 10-and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Minimum student contact hours: 26 Prerequisites: Students must successfully complete the OSHA 511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA 503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.... view moreless

Tuition: 835.00

ETOS-3001 156493 General Industry Safety

Start Date: 11-18-2026
End Date: 11-18-2026

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Cedar Rapids - Main Campus

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162039

Start Date: 12-02-2026
End Date: 12-04-2026

Schedule: Weekly - Wed, Thu, Fri, 8:00 AM - 5:00 PM

Location: Cedar Rapids - Main Campus

This course is designed for Outreach Training Program trainers who have completed OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes. Minimum student contact hours: 18 Prerequisites: OSHA 500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA 500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.... view moreless

Tuition: 720.00

ETOS-3002 156494 Construction Safety

Start Date: 12-16-2026
End Date: 12-16-2026

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Washington County

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162044

Start Date: 01-27-2027
End Date: 01-27-2027

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Linn County

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162045

Start Date: 04-21-2027
End Date: 04-21-2027

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Cedar Rapids - Main Campus

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162041

Start Date: 05-26-2027
End Date: 05-26-2027

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Cedar Rapids - Main Campus

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162038

Start Date: 06-23-2027
End Date: 06-23-2027

Schedule: Weekly - Wed, 6:00 PM - 9:00 PM

Location: Cedar Rapids - Main Campus

This is the STOP class for new Iowa school bus drivers.

Tuition: 40.00

CTTK-1320 162037

Start Date: Starts on Registration
End Date: Ends 6 months after registration

Schedule: No Set Schedule

Location: Online

The EFDA Bridge course is designed for the student who has previously completed some EFDA procedures, either through 91勛圖 Continuing Education or elsewhere, and desires to complete additional Expanded Function procedures in order to obtain their Level 1 certification. This course will allow the student to register for the following functions: Placement of temporary restorative materials following preparation of the tooth by the dentist; Extraoral adjustment to acrylic dentures without making adjustments to prosthetic teeth; and tissue conditioning (soft reline only). If functions are needed in addition to this course to achieve Level 1 Certification, the student will not be eligible for the Bridge course and must register for the full EFDA Grad or Non-Grad course. Coursework is completed through directed text readings along with evaluation measures and completion of laboratory and clinical skills within the student's dental office. The applicant must be currently employed in a dental office to participate in this course. Upon acceptance into 91勛圖's EFDA Bridge Course, the student will be emailed information on scheduling a required orientation meeting with the instructor. Once the orientation is complete, the student will be approved to begin the coursework and they will have 6-months to complete the readings, education measures, and clinical documentation sheets. Orientation must be completed within 4 weeks of registration. There will be on-line quizzes and a final test required to complete the course. Iowa Dental Board-approved Continuing Education Hours (CEHs) will be awarded for each successfully completed function along with a certificate of completion.... view moreless

Tuition: 259.00

CHDE-5661 159826

Start Date: Starts on Registration
End Date: Ends 6 months after registration

Schedule: No Set Schedule

Location: Online

Expanded functions may be performed by registered dental assistants who have completed Iowa Dental Board-approved training. The coursework in this approved EFDA course meets the training guidelines required by the Iowa Dental Board for Expanded Functions Dental Assistants. Coursework is completed through directed text readings along with evaluation measures and completion of clinical skills within the student's dental office. The applicant must be currently employed in a dental office to participate in this course. Procedures available in this course include: Taking occlusal registrations; Placement and removal of gingival retraction material; Fabrication, temporary cementation, temporary recementation, and removal of provisional restorations; Applying cavity liners and bases and desensitizing agents; applying bonding systems, which may include the placement of the attachments used in clear aligner systems, following review of the fit and function by the supervising dentist; placement, bonding, and removal of orthodontic brackets and bands or provisional orthodontic appliances pursuant to subrules 23.4(5) and 23.5(7); Taking final impressions; Removal of adhesives using nonmotorized hand instrumentation; Placement of temporary restorative materials following preparation of the tooth by the dentist; Extraoral adjustment to acrylic dentures without making any adjustments to the prosthetic teeth; tissue conditioning (soft reline only). All procedures, plus Monitoring of Nitrous Oxide Inhalation Analgesia (offered as a separate course for an additional fee), must be successfully completed in order to be an Iowa Dental Board-Certified Level 1 Provider. However, per the Iowa Dental Board, students may choose to train in any one or several of the expanded function duties in order to become a Basic Expanded Function Provider. Upon acceptance into 91勛圖's EFDA program, the student will be emailed information on scheduling a required orientation meeting with the instructor. Once the orientation is complete, the student will be approved to begin the coursework and they will have 6-months to complete the readings, evaluation measures, and clinical documentation sheets. Orientation must be completed within 4 weeks of registration. There will be on-line quizzes and a final test required to complete the course. Iowa Dental Board-approved Continuing Education Hours (CEHs) will be awarded for each successfully completed function along with a certificate of completion. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form at www.kirkwood.edu/cefunding.... view moreless

Tuition: 699.00

CHDE-5002 159820

Start Date: Starts on Registration
End Date: Ends 6 months after registration

Schedule: No Set Schedule

Location: Online

Expanded functions may be performed by registered dental assistants who have completed Iowa Dental Board-approved training. The coursework in this approved EFDA course meets the training guidelines required by the Iowa Dental Board for Expanded Functions Dental Assistants. Coursework is completed through directed text readings along with evaluation measures and completion of clinical skills within the student's dental office. The applicant must be currently employed in a dental office to participate in this course. Procedures available in this course include: Taking occlusal registrations; Placement and removal of gingival retraction material; Fabrication, temporary cementation, temporary re-cementation, and removal of provisional restorations; Applying cavity liners and bases and desensitizing agents; applying bonding systems, which may include the placement of the attachments used in clear aligner systems, following review of the fit and function by the supervising dentist; placement, bonding, and removal of orthodontic brackets and bands or provisional orthodontic appliances pursuant to subrules 23.4(5) and 23.5(7); Taking final impressions; Removal of adhesives using non-motorized hand instrumentation; Placement of temporary restorative materials following preparation of the tooth by the dentist; Extraoral adjustment to acrylic dentures without making any adjustments to the prosthetic teeth; tissue conditioning (soft reline only). All procedures, plus Monitoring of Nitrous Oxide Inhalation Analgesia (offered as a separate course for an additional fee), must be successfully completed in order to be an Iowa Dental Board-Certified Level 1 Provider. However, per the Iowa Dental Board, students may choose to train in any one or several of the expanded function duties in order to become a Basic Expanded Function Provider. Upon acceptance into 91勛圖's EFDA program, the student will be emailed information on scheduling a required orientation meeting with an instructor. Once the orientation is complete, the student will be approved to begin the coursework and they will have 6-months to complete the readings, evaluation measures, and clinical documentation sheets. Orientation must be completed within 4 weeks of registration. There will be on-line quizzes and a final test required to complete the course. Iowa Dental Board-approved Continuing Education Hours (CEHs) will be awarded for each successfully completed function along with a certificate of completion. Tuition assistance may fund up to 100 percent of your registration cost for this program. Fill out our funding referral form at www.kirkwood.edu/cefunding.... view moreless

Tuition: 899.00

CHDE-5502 159822

Start Date: Starts on Registration
End Date: Ends 6 months after registration

Schedule: No Set Schedule

Location: Online

The Expanded Functions Orthodontic course is designed for the student who currently works in an orthodontic office and requires limited skills in the EFDA program. Expanded functions may be performed by registered dental assistants who have completed Iowa Dental Board-approved training. The coursework in this approved EFDA course meets the training guidelines required by the Iowa Dental Board for Expanded Functions Dental Assistants. Coursework is completed through directed text readings along with evaluation measures and completion of clinical skills within the student's orthodontic office. The applicant must be currently employed in an orthodontic office to participate in this course. Procedures available in this course include: Taking occlusal registration; applying cavity liner and bases and desensitizing agents; applying bonding systems, which may include the placement of the attachments used in clear aligner systems, following review of the fit and function by the supervising dentist; placement, bonding, and removal of orthodontic brackets and bands or provisional orthodontic appliances pursuant to subrules 23.4)5) and 23.5(7); taking final impressions; removal of adhesives using non-motorized hand instrumentation. Per the Iowa Dental Board, students may choose to train in any one or several of the expanded function duties in order to become a Basic Expanded Function Provider. Please note this course contains the skills specific to the orthodontic office and does not include all of the Level 1 expanded functions. To become designated as a Certified Level 1 Provider, you must have successfully completed the training for all twelve of the listed Level 1 procedures. Upon acceptance into this program, the student will be emailed information to schedule a required orientation meeting with the instructor. Once the orientation is complete, the student will be approved to begin the coursework and they will have 6-months to complete the readings, evaluation measures, and clinical documentation sheets. Orientation must be completed within 4 weeks of registration. There will be on-line quizzes and a final test required to complete the course. Iowa Dental Board-approved Continuing Education Hours (CEHs) will be awarded for each successfully completed function along with a certificate of completion.... view moreless

Tuition: 429.00

CHDE-5510 159824

Showing